This walking groover cuts clean, smooth professional control joints every time. The groover was created with the needs of the west coast contractor in mind. The rivetless design allows for sharp, clean joints without mussing the top of the slab. The groover is formed from a single piece of rivet-free stainless steel to provide a completely smooth clean groove. This tool creates a groove in wet cement to control expansion and contraction and relieve stress points. The 8" long groover creates a 3/4" deep groove with a 1/2" radius to prevent chipping. Each groover is made from strong #18 gauge brushed stainless steel that won't rust for a smooth working surface with easy clean-up. The rivet free design combines an 8" square groover base, top plate and bracket base to be electronically welded together providing strength to move through concrete. Tall sides on the tool prevent the build-up of material on top. The swivel top rotates 360° to work from any angle. tighten the wingnut on the bracket to lock in an angle. Use with a Narrow Clevis Handle or Adapter, sold separately.

Kraft Tool Model No. CC3413-01

• #18 gauge brushed stainless steel blade
• Makes 3/4" deep groove
• Creates 1/2" radius to prevent chipping of concrete
• Single-piece bit for clean grooves
• Tall sides prevent build-up on top of groover
• Square ends work along forms
• Rivet-free for a smooth finish
• Reinforced with back plate
• Stainless steel won't rust
• Easy to clean
• Swivel bracket rotates 360°
• Use with Narrow Clevis Handle or Adapter