No matter what edge you're facing, the FallTech DuraTech Leading Edge delivers the highest level of fall protection. It's tough enough for daily jobsite abuse, while being light enough to carry and stack. It's been fine-tuned for an exceptionally smooth payout so you can work without worrying about nuisance lockup.

FallTech DuraTech Leading Edge SRLs feature a dual deceleration system including an internal inertial brake and external energy absorber to reduce the risk of cable failure when contacting a sharp leading edge during a fall event. DuraTech Leading Edge SRLs may be anchored overhead and up to 5' below the dorsal D-ring. All DuraTech Leading Edge SRLs are thoroughly tested to and meet the rigorous ANSI/ASSP Z359.14-2021 standard specifically for leading edge performance.

Falltech Model No. 7232CLE

• Anchoring flexibility. Anchor overhead or at foot level. The choice is yours.
• Reduced nuisance lockups.
• Low cost of ownership. We know you're hard on your gear so we designed the cast aluminum housing to last.
• Extra large, double locking anchorage carabiner included
• Rugged lightweight aluminum housing
• 7/32" galvanized steel cable
• External energy absorber with patented ViewPack® cover
• Load-indicating swivel snap hook
• Stackable housing
• Complies with ANSI Z359.14-2021 Class 2 SRL.

ANSI Z359.14-2021 SRD Types and Classes Effective on August 1, 2023

Both types and classes were overhauled in 2021: "types" are SRL, SRL-P for personal devices meant to be installed on the user's full body harness, or SRL-R for devices with rescue/retrieval functions, and "classes" are Class 1 or Class 2. The SRD class is now applied to acceptable anchorage locations. Class 1 devices are suitable for at or above dorsal D-ring anchorage locations. Class 2 devices are suitable for above, at, or up to 5 feet below the dorsal D-ring anchorage locations AND must be leading edge rated. So, if your jobsite has edge exposures and you need a leading edge SRL or SRL-LE, you will be looking for a Class 2 device in compliance with ANSI/ASSP Z359.14-2021!